products
GL200
The water resistant GL200 is a powerful GPS locator designed for lone worker, vehicle, pet and asset tracking applications. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GL200's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.
-
Water resistant
-
Quad band GSM/GPRS 850/900/1800/1900 MHz
-
Embedded full featured @Track protocol
-
Internal u-blox chipset
-
Internal GSM/GPS antennas
-
MMCX type RF connector for external GPS antenna
-
Low power consumption, long standby time with internal battery
-
Internal 3-axis accelerometer for power conservation and motion detection
-
Full power management, can be connected to external DC power or battery
-
CE/FCC/PTCRB/Anatel certified
GSM Specifications
| Frequency |
Quad band: 850/900/1800/1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz) |
| GPRS | GPRS multi-slot class 12 GPRS mobile station class B |
| RMS Phase Error | 5 deg |
| Max Out RF Power |
GSM850/GSM900: 33.0±2 dBm DCS/PCS: 30.0±2 dBm |
| Dynamic Input Range | -15 ~ -108 dBm |
| Receiver Sensitivity | Class Ⅱ RBER 2% (-107 dBm) |
| Stability Of Frequency | < 2.5 ppm |
| Max Frequency Error | ±0.1 ppm |
GPS Specifications
| GPS Chipset | 50-channel u-blox All-In-One GPS receiver |
| Sensitivity |
Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy |
Autonomous: < 2.5m SBAS: < 2.0m |
| TTFF (Open Sky) |
Cold start: 27s average Warm start: 27s average Hot start: 1s average |
Interfaces
| Digital Inputs |
Two digital inputs One positive trigger for ignition detection One negative trigger input for normal use |
| Digital Output | One digital output, open drain, 150 mA max current drain |
| Power Button | For power on and power off, can be disabled by OTA using @Track protocol |
| Function Button | Emergency alert or instant geo-fence |
| Mini USB Interface | For external power and configuration |
| MMCX RF Connector | For external GPS antenna |
| Indicator LED | GSM, GPS and battery status |
General Specifications
| Dimensions | 67.5mm*40mm*21mm |
| Weight | 60g |
| Internal Battery | Li-Polymer 1300 mAh |
| Standby Time |
Without reporting: 400 hours 5 minutes reporting: 130 hours 10 minutes reporting: 150 hours |
| Water Resistance | IPX5 compliant |
| Charging Voltage | 5V DC |
| External Battery Voltage | 3.5V to 4.5V DC |
| Operating Temperature | -20℃ ~ +55℃ |
Air Interface Protocol
| Transmit Protocol | TCP, UDP, SMS |
| Scheduled Timing Report | Report position and status according to preset time schedules |
| Geo-fence | Support up to 5 internal geo-fence regions |
| Low Power Alarm | Alarm when internal battery is low |
| Power On Report | Report when the device is powered on |
| Power Off Report | Report when the device is powered off |
| Motion Detection | Motion alarm based on internal 3-axis accelerometer |
| SOS/Emergency Alarm | SOS alarm when function key is long pressed |