products
GV200
The GV200 is a full featured GPS tracker designed for a wide variety of vehicle tracking applications. It has multiple I/O interfaces that can be used for monitoring or controlling external devices. It is supported by a wide variety of accessories. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GV200's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows towing detection. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.
-
Wide operating voltage range 8V to 32V DC
-
Internal u-blox chipset
-
Low power consumption, long standby time with internal battery
-
Quad band GSM/GPRS 850/900/1800/1900 MHz
-
Embedded full featured @Track protocol
-
Multiple I/O interfaces for monitoring and control
-
Internal 3-axis accelerometer for power conservation and motion detection
-
Three analog inputs for external sensor
-
Internal and optional external GSM antenna
-
Internal and optional external GPS antenna
-
CE/E-Mark certified
GSM Specifications
| Frequency |
Quad band: 850/900/1800/1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz) |
| GPRS |
GPRS multi-slot class 12 |
| RMS Phase Error |
5 deg |
| Max Out RF Power |
GSM850/GSM900: 33.0±2 dBm DCS/PCS: 30.0±2 dBm |
| Dynamic Input Range |
-15 ~ -108 dBm |
| Receiver Sensitivity | Class Ⅱ RBER 2% (-107 dBm) |
| Stability Of Frequency | < 2.5 ppm |
| Max Frequency Error | ±0.1 ppm |
GPS Specifications
| GPS Chipset | 56-channel u-blox All-In-One GPS receiver |
| Sensitivity |
Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy (CEP) |
Autonomous: < 2.5m SBAS: < 2.0m |
| TTFF (Open Sky) |
Cold start: 27s average Warm start: 27s average Hot start: 1s average |
Interfaces
| Digital Inputs | Four digital inputs. Two positive trigger inputs and two negative trigger inputs |
| Analog Inputs |
Three analog inputs (0 to 2.8V) |
| Digtal Outputs | Four digital outputs. Negative trigger, 200 mA max current drain |
| Two-Way Audio | Speaker and microphone on 24 pin molex type connector |
| GSM/GPS Antenna | FAKRA type connector for optional external antennas |
| Indicator LED | GSM, GPS and power |
| Serial Port | Two RS232 serial ports on 24 pin molex type connector. One for configuration, the other for external devices (GARMIN protocol support) |
General Specifications
| Dimensions | 105mm*78mm*24mm |
| Weight | 140g |
| Backup Battery | Li-ion 1000 mAh |
| Standby Time |
Without reporting: 220 hours 5 minute reporting: 100 hours 10 minute reporting: 150 hours |
| Operating Voltage | 8V to 32V DC |
| OperatingTemperature |
-30℃ ~ +80℃ (without battery) -40℃ ~ +85℃ for storage (without battery) |
| Power Management | Full power path management. Backup battery is not used when external power is available |
Air Interface Protocol
| Transmit Protocol | TCP, UDP, SMS |
| Scheduled Timing Report | Report position at preset time and distance intervals |
| Geo-fence | Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions |
| Low Power Alarm | Alarm when backup battery is low |
| Power On Report | Report when the device is powered on |
| Tow Alarm | From internal 3-axis accelerometer |
| Antenna Disconnect Alarm | Alarm when the GPS antenna is disconnected |
| Special Alarm | Special alarm based on the digital/analog inputs |
| Remote Control | OTA control of outputs |